DECIMATOR-QUAD

725,00 fara TVA

Quad-Split 3G/HD/SD-SDI to SD-SDI and Composite Multiviewer

The Decimator Quad from Decimator Design is a low-cost, standard definition multiviewer.   Features of the Decimator-Quad include:

  • 4 independent 3G/HD/SD-SDI inputs with auto detection (26 formats)
  • Output either PAL or NTSC or SD-SDI
  • independent quadrants allowing synchronous display of any format/frame rate
  • Simultaneous display for variable aspect ratios per quadrant
  • low latency buffering allowing for non-synchronous inputs
  • control on-unit using the dip switch and rotary

The unit comes with a Locking DC Power Supply & Mounting Bracket.  

Category: .

Product Description

DECIMATOR-QUAD

VIDEO FORMATS
3G:

  • SMPTE 424M@2.97 and 2.967Gb/s
  • 1080p@60/59.94/50Hz

HD:

  • SMPTE 292M/274M/296M@1.485 and 1.435Gb/s
  • 1080i@60/59.94/50Hz
  • 1080p/psf@30/29.97/25/24/23.98Hz
  • 720p@60/59.94/50/30/29.97/25/24/23.98Hz

SD:

  • SMPTE 259M@270Mb/s
  • 625i50
  • 525i59.94

MENU OPTIONS

  • Input status for all 4 inputs
  • Output format
  • Full screen enable
  • Full screen input select
  • Output aspect and type of 16:9 or 4:3 at either 90 or 100% of screen size
  • Individual aspect format for each input of Same as output, Letter-box or Pillar-box
  • Border Enable
  • Quad split mode reference of either Free-run or input 1

INPUTS

  • 4 x 3G/HD/SD-SDI
  • Input Equalization > 200M for SDI, > 200M for HD-SDI or > 100M 3G-SDI using Belden 1694A

OUTPUTS

  • 1 x 10-bit SD-SDI Re-clocked
  • Composite (PAL or NTSC)

LED STATUS

  • Power
  • 4 x Signal lock and rate

DIMENSIONS
94mm x 94mm x 23mm (3.7” x 3.7” x 0.9“)

POWER

  • +5V to +20V DC, 5 Watts
  • Positive Centre Pin

Reviews

There are no reviews yet, would you like to submit yours?

Only logged in customers who have purchased this product may leave a review.